Self Propelled Scissor Lift Aerial Work Platform 6m Hydraulic Drive
Product Description
1. Advantage:
-- You can control it on the platform and on the chassis, operate easily and freely.
-- Extension platform, large working place.
-- Removable guardrail
-- 90 degree steering wheel can run in high and low speed.
2. Introduction:
1. The scissors lift tables storage battery as the power source, and makes low noise and no emission when working, so it can be used in indoor occasions such as workshops, warehouses, hotels, etc.
2. Larger working space: The platform can extend on one side, which can enlarge the working space.
3. Swing-out battery box and power module trays allow easy access to engine components for convenient service
4.Scissor platforms offer up to 25% grade ability when driving on slopes with safety protection.
5. Control box: there are control box not only on the platform but also on the chassis, easy to control.
6. Safety bar: The safe bar helps to support the unit as a duplicate protection when the machine need some maintenances.
7. Battery with charger: Trojan brand, import from USA, better service than normal battery.
8. Hydraulic motor: The hydraulic motor support the 2-front wheel driving with oil inlet pipe and oil outlet pipe conveying oil.
Tire: Non-marking tire help to prevent the damage to the floor and stuck by the impurities.
Standard features
● Proportional control
● Automatic Pothole Guard System
● Solid non-marking tires
● Auto brake system
● Emergency platform lowering system
● Emergency stop button
● Hour meter
● Motion alarm
● Electronic horn
● Extension platform
● Descent alarm
● Descent protection
● Tilt protection system
● Folding rails
● Protection bar around chassis
| Production Specification | JCPT0808HD |
| Measurement | |
| Working Height Max. | 8m |
| A Platform Height Max. | 6m |
| B Platform Height Stowed | 1.86m |
| C Platform Length-outside | 2.40m |
| Extended | 3.30m |
| Slide-out Platform extension deck | 0.90m |
| D Platform Width | 0.81m |
| E Height-stowed: guardrail raised | 2.20m |
| F Length-Stowed | 2.43m |
| G Width | 0.87m |
| H Wheel Base | 1.87m |
| I Ground Clearance | 10cm |
| J With Pothole Guards Deployed | 1.9cm |
| | |
| Productivity | |
| Max. Platform Occupancy | 2 |
| Lift Capacity | 230kgs |
| Drive speed-stowed | 4.0km/h |
| Drive speed-Raised | 0.8km/h |
| Gradeability | 25% |
| Max. Tilt | 3°/ 1.5° |
| Turning Radius(inside) | 0 |
| Turning Radius(outside) | 2.19 |
| Raise/lower speed | 24/54sec |
| Non-marking tires | Φ381×127 |
| | |
| Power | |
| Power Source | 24V/3.3KW |
| Battery | 4x6V/225Ah |
Product Tags:
|
|
Convient Hydraulic Scissor Lift Extension Industrial Hydraulic Lift Platform Images
|
